Liquid Applied Membrane

BLUSKY™ FLOWTHANE PU1K is a single component, bitumen / coal tar free high solid content liquid applied elastomeric Pure polyurethane resin based cold applied coating system. Ideally suited for waterproofing of roofs, terraces, walls, basement, Planter, Garden, etc. Advantages Can be applied by brush or roller No root penetration through the hardened coating No harm…

BLUSKY™ FLOWTHANE-AR is two component, high solid content liquid applied elastomeric polyurethane resin based cold applied coating system with anti-root property. Ideally suited for waterproofing of green roofs, walls conforming to ASTM C-836-95 & ASTM C – 898-95 Advantages Can be applied by brush or roller No root penetration through the hardened coating No harm…

BLUSKY™ FLOWSHIELD is pure acrylic polymer basedelastomeric high build solar heat reflecting eco- friendly paintfor roof and exterior walls. The cooling effect is designed withhigh quality titanium di oxide pigment which reflects more than80% of solar radiation and specialty micronized ceramic hollowsphere which reduces heat transmission inside the room. Thecured BLUSKY™ FLOWSHIELD also acts as…

BLUSKY™ FLOWCRYSTAL is a general purpose cementitiouswaterproofing system which protects and waterproofs concretestructures by crystallization. The active chemicals react withmoisture in the concrete resulting in crystalline formation withinthe pores and capillary tracts of concrete thus waterproofingthe structure against penetration of water and other liquidsfrom any direction. BLUSKY™ FLOWCRYSTAL gives a strong andlasting waterproofing protection against…

BLUSKY™ FLOWCRYSTAL PLUS Waterproofing System is asurface-applied crystalline slurry treatment that transformsnew or existing concrete into a permanent waterproof barrier.BLUSKY™ FLOWCRYSTAL PLUS Waterproofing System lowersthe permeability of concrete and protects against the ingressof water and waterborne chemicals. It replaces the need forsurface applied waterproofing membranes, and is often usedin the remediation of failed membranes.BLUSKY™ FLOWCRYSTAL…

BLUSKY™ FLOWCRETE is an acrylic polymer used ascementitious waterproof coating and repair mortar forconcrete structure. When BLUSKY™ FLOWCRETE Polymer ismixed with cement, a liquid slurry is formed and this slurry usedas waterproof coating. Advantages Resistant to UV (Ultra - Violet) rays Develops excellent bond with most of the building materials. Prevents peeling and blistering Arrests…

BLUSKY™ FLOWCRETE 2K is a two component, elastomeric,acrylic polymer modified cementitious waterproofingprotective coating system in slurry form. Advantages Resistant to UV (Ultra - Violet) rays Develops excellent bond with most of the building materials Prevents peeling and blistering Arrests salt petre and prevent penetration of salts into concrete and mortar Unaffected by chemical attacks ranging…

BLUSKY™ FLOWCRETE2K XL is a two component, highperformance, elastomeric, acrylic polymer modifiedcementitious waterproofing protective coating system in slurryform. Advantages Resistant to UV (Ultra - Violet) rays Develops excellent bond with most of the building materials. Prevents peeling and blistering Arrests salt petre and prevent penetration of salts into concrete and mortar. Unaffected by chemical attacks…

BLUSKY™ FLOWCOALTAR is two parts Coal-Tar-Epoxy specially designed for protection of concrete and steel structure in agressive environment. BLUSKY™ FLOWCOALTAR available in low viscosity (BLUSKY™ FLOWCOALTAR LB) as well as high build (BLUSKY™ FLOWCOALTAR HB). BLUSKY™ FLOWCOALTAR is based on Phenalkamine polymer which provides extra chemical resistance and moisture tolerance of the surface Advantages Excellent…

BLUSKY™ FLEXYCOAT AC is acrylic polymer based elastomeric, waterproofing protective coating system. In addition to UV resistance acrylic polymer, BLUSKY™ FLEXYCOAT AC is designed with proprietary additives to resist post growth of algae and fungus. The thixotropic nature of the coating helps to apply thick film to get desired film thickness (1 to 1,5mm) with…

BLUSKY™ FLEXY PRIMER is a general purpose single component primer for elastomeric membrane forming material. It is carefully formulated using some selective polymers to give a continuous base–coating for products like BLUSKY™ FLEXYCOAT AC / BLUSKY™ FLOWSHIELD membrane system. Its main function is to enhance the bonding between the substrate to the membrane, as well…